Replacement front washer jets

[Phil3747]

One of my front washer jets got blocked yesterday and despite my best efforts, I was unable to unblock it so started searching for a replacement but it appears that Hyundai want £22 for a pair
So, I turned to Amazon and came across these and although it doesn't mention the Kona, they looked identical so I ordered them and am pleased to report that they are a perfect fit and work perfectly too....

https://www.google.co.uk/url?sa=t&rct=j ... i=89978449

[ibradburn]

Just as added bonus to this , if your rear wash stops , pull the inner cover of and there is little one way valve ,(spring and stopper ) take this out and will work.
Dealer wanted to charge £69 , you tube and two minutes later ,sorted !!

[Simon464]

Hi, got a similar issue where the garage didn’t know how to fix the problem. I’ve got the replacement fittings as suggested, but struggling to remove the old nozzle. Did you just use brute force and pull it out or does it need unclipping within the engine are?

[ibradburn]

As you will probably see from the new ones the two prongs push in , i do use force and small thin screwdriver to get them out.
Tip , make sure you keep hold off the tube , otherwise will fall inside and akward to get hold off !

[Phil3747]

Agree 100%...you can either use a pair of molegrips to hold the tube or insert a screwdriver

[Simon464]

Thank you - got it sorted. And yes nearly saw the tube disappear so thanks for the tip!

[Phil3747]